¡Hola! - ESP
Estas son nuestras líneas de negocio. En ellas, podrás encontrar las soluciones más innovadoras
Catálogos
X
Y estos son los pilares fundamentales, el alma de Avinent
Shop
Área Cliente
¡Hola! - ESP

Publicaciones científicas

RESULTADOS DE LAS INVESTIGACIONES

Avinent colabora en investigaciones científicas relacionadas con la implantología dental y la cirugía maxilofacial.
La colaboración nace con varios centros universitarios y con reconocidos científicos de diferentes disciplinas.
A continuación os presentamos alguno de los trabajos que se han impulsado y realizado hasta ahora:

Waferless Orthognathic Surgery with Customized Osteosynthesis and Surgical Guides: A Prospective Study

Espino-Segura-Illa, M.; Camps-Font, O.; Ferrer-Fuertes, A.; Cuesta-González, F.; Zubillaga-Rodríguez, I.; Sieira-Gil, R.

Customized Subperiosteal Implants for the Rehabilitation of Atrophic Jaws: A Consensus Report and Literature Review

Herce-López, J.; Pingarrón, M.d.C.; Tofé-Povedano, Á.; García-Arana, L.; Espino-Segura-Illa, M.; Sieira-Gil, R.; Rodado-Alonso, C.; Sánchez-Torres, A.; Figueiredo, R.

Modificaciones en el diseño de los implantes subperiósticos personalizados para evitar complicaciones. Presentación de una serie de casos y revisión de la literatura

Tofé Povedano A., Parras Hernández J., Herce López J., Matute García D., Astolfi González-Moguena V, Rollón-Mayordomo Á.

In Vitro Characterization of an Anodized Surface of a Dental Implant Collar and Dental Abutment on Peri-Implant Cellular Response

Valeria Traver-Méndez, Octavi Camps-Font, Francesc Ventura, Miquel Angel Nicolau-Sansó, Carles Subirà-Pifarré, Rui Figueiredo and Eduard Valmaseda-Castellón

Effect of Implantoplasty on Roughness, Fatigue and Corrosion Behavior of Narrow Diameter Dental Implants

Camps-Font O, Toledano-Serrabona J, Juiz-Camps A, Gil J, Sánchez-Garcés MA, Figueiredo R, Gay-Escoda C, Valmaseda-Castellón E.

Computer-guided surgical exposure of palatally displaced canines: a technical note

Octavi Camps-Font, Javi Vilarrasa

Guided Genioplasty: Comparison between Conventional Technique and Customized Guided Surgery

Antúnez-Conde Hidalgo, R.; Silva Canal, J.L.; Navarro Cuéllar, C.; Sánchez Gallego-Albertos, C.; Arias Gallo, J.; Navarro Cuéllar, I.; López Davis, A.; Demaria Martínez, G.; Naranjo Aspas, N.; Zamorano León, J.; Chamorro Pons, M.

Influence of the Use of Transepithelial Abutments vs. Titanium Base Abutments on Microgap Formation at the Dental Implant–Abutment Interface: An In Vitro Study

Rocío Cascos, Alicia Celemín-Viñuela, Nataly Mory-Rubiños, Cristina Gómez-Polo, Rocío Ortega, Rubén Agustín-Panadero and Miguel Gómez-Polo

Accuracy of five different 3D printing workflows for dental models comparing industrial and dental desktop printers

Morón‑Conejo B, López‑Vilagran J, Cáceres D, Berrendero S, Pradíes G.

Development of a 3D Individualized Mask for Neonatal Non-Invasive Ventilation

Borràs-Novell C, Causapié MG, Murcia M, Djian D, García-Algar Ó.

Customized Titanium Mesh for Guided Bone Regeneration with Autologous Bone and Xenograft

Bertran Faus A, Cordero Bayo J, Velasco-Ortega E, Torrejon-Moya A, Fernández-Velilla F, García F, López-López J.

Advantages of using custom guides and plates in mandibular chin wing osteotomies: A 3-case series

Arcas A, Pozuelo L, Martínez I, Yurrita A, Rovira-Lastra B, Ayuso R.

Ion release and local effects of titanium metal particles from dental implants: An experimental study in rats

Toledano-Serrabona J, Camps-Font O, de Moraes DP, Corte-Rodríguez M, Montes-Bayón M, Valmaseda-Castellón E, Gay-Escoda C, Sánchez-Garcés MÁ.

Evaluation of virtual surgical planning and three-dimensional configurations for reconstruction of maxillary defects using the fibula free flap

Verdoy SB, Sadeghi P, Ojeda AL, Palacín Porté JA, Vinyals Vinyals JM, Barceló LH, Lluis EC, Compta XG, Diaz AT, Segú JOB.

Microleakage assessment of CAD-CAM Cobalt-Chrome and Zirconia abutments on a conical connection dental implant: A comparative in vitro study

Molinero-Mourelle P, Roccuzzo A, Yilmaz B, Lam WYH, Pow EHN, Highsmith JDR, Gómez-Polo M.

Digital Impression Taking for Maxillary Full-Arch Restoration With Immediate Loading: A Case Report

Rico JP, Brinkmann JC, Martin MC, González MA, Arribas CT, Alonso VR, Suárez CL, Suárez García MJ.

Virtual Surgical Planning and Customized Subperiosteal Titanium Maxillary Implant (CSTMI) for Three Dimensional Reconstruction and Dental Implants of Maxillary Defects after Oncological Resection: Case Series

Cebrián Carretero JL, Del Castillo Pardo de Vera JL, Montesdeoca García N, Garrido Martínez P, Pampín Martínez MM, Aragón Niño I, Navarro Cuéllar I, Navarro Cuéllar C.

Maxillary reconstruction with subperiosteal implants in a cancer patient: A one-year follow-up

Garrido-Martínez P, Quispe-López N, Montesdeoca-García N, Esparza-Gómez G, Cebrián-Carretero JL.

Immediate implant placement in fresh alveolar sockets with a minimal split-thickness envelope flap. A randomised controlled clinical trial

Garcia-Sanchez, R., Mardas, N., Buti, J., Ortiz Ruiz, A.J. and Pardo Zamora, G.

Effect of Fabrication Technique on the Microgap of CAD/CAM Cobalt-Chrome and Zirconia Abutments on a Conical Connection Implant: An In Vitro Study

Molinero-Mourelle P, Cascos-Sanchez R, Yilmaz B, Lam WYH, Pow EHN, Del Río Highsmith J, Gómez-Polo M.

Short Dental Implants (≤8.5 mm) versus Standard Dental Implants (≥10 mm): A One-Year Post-Loading Prospective Observational Study

Pardo-Zamora G, Ortiz-Ruíz A, Camacho-Alonso F, Martínez-Marco J, Molina-González J, Piqué-Clusella N, Vicente-Hernández A

Erythritol-enriched powder and oral biofilm regrowth on dental implants: an in vitro study

Amate-Fernández P, Figueiredo R, Blanc V, Àlvarez G, León R, Valmaseda-Castellón E.

Mechanical Properties and Corrosion Behavior of Ti6Al4V Particles Obtained by Implantoplasty: An In Vitro Study. Part II

Toledano-Serrabona J, Sánchez-Garcés MÁ, Gay-Escoda C, Valmaseda-Castellón E, Camps-Font O, Verdeguer P, Molmeneu M, Gil FJ.

A 3D-Printed Model of a Titanium Custom-Made Talus for the Treatment of a Chronic Infection of the Ankle

Grau D, Matamala A, Bernaus M, Veloso M, Anglès F, Poggio D, Font-Vizcarra L.

Physicochemical and Biological Characterization of Ti6Al4V Particles Obtained by Implantoplasty: An In Vitro Study. Part I

Toledano-Serrabona J, Gil FJ, Camps-Font O, Valmaseda-Castellón E, Gay-Escoda C, Sánchez-Garcés MÁ.

Implantes subperiósticos personalizados para la rehabilitación completa del maxilar superior atrófico. Revisión de una serie clínica de 8 casos

Chamorro Pons Manuel, Arias Gallo Javier, Margarit Pérez Luis, Demaría Martínez Gastón, Cidad Vicario Ángel.

Effect of cementation and aging on the marginal fit of veneered and monolithic zirconia and metal-ceramic CAD-CAM crowns

Del Piñal M, Lopez-Suarez C, Bartolome JF, Volpato CA, Suarez MJ.

Effect of bone loss on the fracture resistance of narrow dental implants after implantoplasty. An in vitro study

Leitão-Almeida B, Camps-Font O, Correia A, Mir-Mari J, Figueiredo R, Valmaseda-Castellón E.

Effect of crown to implant ratio and implantoplasty on the fracture resistance of narrow dental implants with marginal bone loss: an in vitro study

Leitão-Almeida B, Camps-Font O, Correia A, Mir-Mari J, Figueiredo R, Valmaseda-Castellón E.

Influence of the Titanium Implant Surface Treatment on the Surface Roughness and Chemical Composition. Materials (Basel)

Nicolas-Silvente AI, Velasco-Ortega E, Ortiz-Garcia I, Monsalve-Guil L, Gil J, Jimenez-Guerra A.

Effects of Drilling Protocol and Bone Density on the Stability of Implants According to Different Macrogeometries of the Implant Used: Results of an In Vitro Study

Pérez-Pevida E., Cherro R., Camps-Font O., Piqué N.

Effect of an Er,Cr:YSGG Laser on the Surface of Implants: A Descriptive Comparative Study of 3 Different Tips and Pulse Energies

Chegeni E, España-Tost A, Figueiredo R, Valmaseda-Castellón E, Arnabat-Domínguez J.

Guided implant scanning: A procedure for improving the accuracy of implant-supported complete-arch fixed dental prostheses

Gómez-Polo M, Ballesteros J, Perales-Padilla P, Perales-Pulido P, Gómez-Polo C, Ortega R.

Accuracy of the implant replica positions on the complete edentulous additive manufactured cast.

Olea-Vielba M., Jareño-García D., Methani M.M., Martinez-Klemm I., Revilla-León M.

Fracture resistance after implantoplasty in three implant-abutment connection designs

Camps-Font O., González-Barnadas A., Mir-Mari, R Figueiredo J., Gay-Escoda C., Valmaseda-Castellón E.

Evaluation of Milled Titanium versus Laser Sintered Co-Cr Abutments on the Marginal Misfit in Internal Implant-Abutment Connection

Gonzalo E, Vizoso B, Lopez-Suarez C, Diaz P, Pelaez J, Suarez MJ.

CBCT and CAD-CAM technology to design a minimally invasive maxillary expander

Sánchez-Riofrío D, Viñas MJ, Ustrell-Torrent JM.

Mandibular Angle Augmentation using Customized PEEK Implants and Guides Generated with 3D Planning and Printing: Case Studies

Arcas A, Vendrell G, Cuesta F, Bermejo L, Piqué N

Assessment of Dental Implants with Modified Calcium-Phosphate Surface in a Multicenter, Prospective, Non-Interventional Study: Results up to 50 Months of Follow-Up

Carles Subirà-Pifarré, Cristina Masuet-Aumatell, Carlos Rodado Alonso, Ricardo Medina Madrid and Cosimo Galletti.

Adhesion, integration and osteogenesis of human dental pulp stem cells on biomimetic implant surfaces combined with plasma derived products

Irastorza I, Luzuriaga J, Martinez-Conde R, Ibarretxe G, Unda F.

Mentoplasty with Customized Guides and Plates Using 3D Technology: a More Precise and Safer Technique

Arcas A, Vendrell G, Cuesta F, Bermejo L.

Precision and safety of Multilevel Cervical Transpedicular Screw Fixation with 3D Patient-Specific Guides; A Cadaveric Study.

Sallent A, Ramírez M, Catalá J, Rodríguez-Baeza A, Bagó J, de Albert M, Vélez R.

Functionalization of titanium implants with phase-transited lysozyme for gentle immobilization of antimicrobial lysozyme.

Diaz-Gomez L, Concheiro A, Alvarez-Lorenzo C.

Advantages of performing mentoplasties with customized guides and plates generated with 3D planing and printing Advantages of performing mentoplasties with customized guides and plates generated with 3D planing and printing

Arcas A, Vendrell G, Cuesta F, Bermejo L.

Accuracy of four digital scanners according to scanning strategy in complete-arch impressions

Medina-Sotomayor P, Pascual-Moscardó A, Camps I.

Accuracy of 4 digital scanning systems on prepared teeth digitally isolated from a complete dental arch

Medina-Sotomayor P, Pascual-Moscardo A, Camps A I.

Fatigue and microgap behaviour of a three-unit implant fixed dental prosthesis combining conventional and dynamic abutments

Rocha Ferreira J, Song N, Machado M, Machado L, Correia A, Reis A.

Relationship between resolution and accuracy of four intraoral scanners in complete-arch impressions

Medina-Sotomayor P, Pascual-Moscardó A, Camps I.

How 3D patient-specific instruments improve accuracy of pelvic bone tumour resection in a cadaveric study

A. Sallent, M. Vicente, M. M. Reverté, A. Lopez, A. Rodríguez-Baeza, M. Pérez-Domínguez, R. Velez

A clinical study assessing the influence of anodized titanium and zirconium dioxide abutments and peri-implant soft tissue thickness on the optical outcome of implant-supported lithium disilicate single crowns

Martínez-Rus F, Prieto M, Salido MP, Madrigal C, Özcan M, Pradíes G.

Dental implants after the use of bichat's buccal fat pad for the sealing of oro-antral communications. A case report and literature review

Galletti C, Cammaroto G, Galletti F, Camps-Font O, Gay-Escoda C, Bara-Casaus JJ.

SEM surface analyses of 120 sterile-packed implants

Duddeck D, Maghaireh H, Faber F and Neugebauer J.

Tissue-Engineered Oral Mucosa in jaw Reconstruction

Sieira Gil R, Pagés CM, Díez EG, Llames S, Fuertes AF, Vilagran JL.

Analysis of the misfit of dental implant-supported prostheses made with three manufacturing processes

Fernández M, Delgado L, Molmeneu M, García D, Rodríguez D.

Adhesion of dental porcelain to cast, milled, and laser-sintered cobalt-chromium alloys

Serra-Prat J, Cano-Batalla J, Cabratosa-Termes J, Figueras-Àlvarez O.

Invitro osteoinductive of human mesenchymal stem cells in biomimetic surface modif ti alloy implants

Santander S, Alcaine C, Lyahyai J, Pérez MA, Rodellar C, Doblaré M, Ochoa I.

Life prediction of different commercial dental implants as influence by uncertainties in their fatigue material properties and loading conditions

Pérez MA.

Stress transfer properties of different commercial dental implants: a finite element

Pérez MA, Prados-Frutos JC, Bea JA, Doblaré M.

Caracterización química y biológica de la superficie Biomimetic Advanced Surface

Aleix Mestre Vinardell